Manufacturer/Distributor
Heat Shrink Tubing

ETHC .440 Our most popular tubing!
Clear Medium Wall adhesive tubing is the same high-quality tubing developed for ESP's quality splice kits SP2C through SP8C series. Due to its high shrink ratio of 3:1, it is extremely versatile to adapt to sealing wire sizes #14 through #6. The inner wall contains a heavy thermo-plastic adhesive that provides a permanent non-drying, waterproof seal.

ETH .440
Black Medium Wall adhesive tubing is the same high-quality used for ESP's quality splice kits SP2B through SP8B series. Due to its high shrink ratio of 4:1, it is extremely versatile to adapt to sealing wire sizes #14 through #6. The inner wall contains a heavy thermo-plastic adhesive that provides a permanent non-drying, waterproof seal.

ETHG-C .400, .750, 1.10
Heavy Dual Wall adhesive tubing is the same tubing used for ESP's quality splice kits SP2C-HD through SP#2C-HD series. This tubing is used in cable repair and splicing applications and will provide an insulation thickness of at least that required by IPCEA and NEMA specifications for cross-linked polyethylene insulated wire and cable. Provides greater split resistance, even when overheated, than competitor products.

ETST .400, .750, 1.10
Heavy Dual Wall adhesive tubing is the same high-quality tubing developed for ESP's quality splice kits SP2B-HD through SP#1/0-HD series. Provides greater split resistance, even when overheated, than competitor products.

Copyright © 2015 Electronic Sensor Products. All rights reserved.